View AP2192A_4945427.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Description
The AP2182A and AP2192A are dual channel current-limited integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and available with both polarities of Enable input. The devices have fast short-circuit response time for improved overall system robustness, and have integrated output discharge function to ensure completely controlled discharging of the output voltage capacitor. They provide a complete protection solution for application subject to heavy capacitive loads and the prospect of short circuit, and offer reverse current blocking, over-current, over-temperature and short-circuit protection, as well as controlled rise time and under-voltage lockout functionality. A 7ms deglitch capability on the open-drain Flag output prevents false over-current reporting and does not require any external components. All devices are available DFN3030E-8 packages. in SO-8, MSOP-8-EP and
Pin Assignments
( Top View ) GND IN EN1
1 2 3 8 7 6 5
FLG1 OUT1 OUT2 FLG2
NEW PRODUCT
EN2 4
SO-8
( Top View ) GND IN EN1 EN2
1 2 3 4 8 7 6 5
FLG1 OUT1 OUT2 FLG2
Features
* * * * * * * * * * * * * * * * Dual channel current-limited power switch with output discharge Fast short-circuit response time: 2s 2.0A accurate current limiting Reverse Current Blocking 85m on-resistance Input voltage range: 2.7V - 5.5V Built-in soft-start with 0.6ms typical rise time Short circuit and thermal protection Fault report (FLG) with blanking time (7ms typ) ESD protection: 2KV HBM, 300V MM Active high (AP2192A) or active low (AP2182A) enable Ambient temperature range: -40C to 85C SO-8, MSOP-8-EP and DFN3030E-8 (Exposed Pad): Available in "Green" Molding Compound (No Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) UL Recognized, File Number E322375 IEC60950-1 CB Scheme Certified
MSOP-8-EP
( Top View )
GND IN EN1 EN2
1 2 3 4 8 7 6 5
FLG1 OUT1 OUT2 FLG2
DFN3030E-8
Applications
* * * * LCD TVs & Monitors Set-Top-Boxes, Residential Gateways Laptops, Desktops, Servers, Printers, Docking Stations, HUBs
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 1 of 17 www.diodes.com October 2010
(c) Diodes Incorporated
Notes:
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Application Circuit
AP 2192 A Enable Active High
Power Supply 2.7V to 5.5V 10k 10k 1uF FLG 1 FLG 2 ON EN1 EN2 OUT2 1uF GND 10uF* Load IN OUT1 1uF 10uF* Load
NEW PRODUCT
OFF
Note: * USB 2.0 requires 120uF per hub
Available Options Part Number AP2182A AP2192A Channel 2 2 Enable pin (EN) Active Low Active High Current limit (typical) 2.0A 2.0A Recommended maximum continuous load current 1.5A 1.5A
Pin Descriptions
Pin Name GND IN EN1 EN2 FLG2 OUT2 OUT1 FLG1 Exposed Pad Pin Number 1 2 3 4 5 6 7 8 Ground Voltage input pin Switch 1 enable input, active low (AP2182A) or active high (AP2192A) Switch 2 enable input, active low (AP2182A) or active high (AP2192A) Switch 2 over-current and over-temperature fault report; open-drain flag is active low when triggered Switch 2 voltage output pin Switch 1 voltage output pin Switch 1 over-current and over-temperature fault report; open-drain flag is active low when triggered Internally connected to GND; recommend connecting to the GND externally for improved power dissipation Descriptions
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
2 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE
Functional Block Diagram
AP2182A, AP2192A
T h e rm a l S ense FLG 1
D e g litc h EN1 D riv e r U VLO C u rre n t L im it GND
NEW PRODUCT
C u rre n t S ense D is c h a rg e C o n tro l
OUT1
IN
C u rre n t S ense D is c h a rg e C o n tro l D riv e r C u rre n t L im it D e g litc h
OUT2
U VLO
FLG 2
EN2
T h e rm a l S ense
GND
Absolute Maximum Ratings
Symbol ESD HBM ESD MM VIN VOUT VEN , VFLG Iload TJmax TST
Notes:
Parameter Human Body Model ESD Protection Machine Model ESD Protection Input Voltage Output Voltage Enable Voltage Maximum Continuous Load Current Maximum Junction Temperature Storage Temperature Range (Note 2)
Ratings 2 300 6.5 VIN + 0.3 6.5 Internal Limited 150 -65 to 150
Units KV V V V V A C C
2. UL Recognized Rating from -30C to 70C (Diodes qualified TST from -65C to 150C)
Recommended Operating Conditions
Symbol VIN IOUT TA AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
Parameter Input voltage Output Current Operating Ambient Temperature
3 of 17 www.diodes.com
Min 2.7 0 -40
Max 5.5 1.5 85
Units V A C
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE
Electrical Characteristics (TA = 25oC, VIN = +5.0V, unless otherwise stated)
Symbol VUVLO ISHDN IQ ILEAK IREV Parameter Input UVLO Input Shutdown Current Input Quiescent Current, Dual Input Leakage Current Reverse Leakage Current Test Conditions (Note 3) Min 1.6 Typ. 2.0 0.1 115 0.01 90 85 110 105 Max 2.4 1 180 1 0.1 110 105 135 130 125 170 1.6 3.2 2.0 4.0 2.5 5.0 2.0 3.2 4.0 2 0.8 2 0.5 0.6 0.05 0.2 0.1 20 0.01 7 100 140 25 115 75 60 1 1 1.5 0.3 0.5 0.3 40 1 15 4.8 2.4 4.8 A A A A A A s V V A A ms ms ms ms A ms C C
o
RDS(ON)
ILIMIT ILIMIT_G ITrig ITrig_G IOS IOS_G TSHORT VIL VIH ISINK ILEAK-O TR TF TD(ON) TD(OFF) RFLG IFOH TBlank RDIS TSHDN THYS JA
Notes:
Disabled, IOUT= 0 Enabled, IOUT= 0 Disabled, OUT grounded Disabled, VIN = 0V, VOUT = 5V, IREV at VIN VIN = 5V, IOUT = 1.5A, SO-8 TA = 25oC MSOP-8-EP, DFN3030E-8 Switch on-resistance VIN = 5V, IOUT = 1.5A, -40oC TA 85oC SO-8 VIN = 3.3V, IOUT = 1.5A, o TA = 25 C MSOP-8-EP, DFN3030E-8 VIN = 3.3V, IOUT = 1.5A, -40oC TA 85oC VIN = 5V, VOUT = 4.0V, o o Over-Load Current Limit -40 C TA 85 C CL=10F VIN = 5V, VOUT = 4.6V, -40oC TA 85oC Ganged Over-Load Current Limit OUT1 & OUT2 tied together, CL=10F Current limiting trigger threshold Output Current Slew rate (<100A/s), CL=10F OUT1 & OUT2 tied together, Output Current Slew Ganged current limiting trigger threshold rate (<100A/s) , CL=10F OUTx connected to ground, device enabled into Short-circuit current per channel short circuit, CL=10F OUT1 & OUT2 connected to ground, device Ganged short-circuit current enabled into short-circuit, CL=10F Short-circuit response time VOUT = 0V to IOUT = ILIMIT (output shorted to ground) EN Input Logic Low Voltage VIN = 2.7V to 5.5V EN Input Logic High Voltage VIN = 2.7V to 5.5V EN Input leakage VEN = 0V to 5.5V Output leakage current Disabled, VOUT = 0V Output turn-on rise time CL = 1F, Rload = 5 Output turn-off fall time CL = 1F, Rload = 5 Output turn-on delay time CL = 100F, Rload = 5 Output turn-off delay time CL = 100F, Rload = 5 FLG output FET on-resistance IFLG = 10mA FLG off current VFLG = 5V FLG blanking time CL=10F Discharge resistance (Note 4) VIN = 5V, disabled, IOUT =1mA Thermal shutdown threshold Enabled, Rload=1k Thermal shutdown hysteresis SO-8 (Note 5) Thermal Resistance Junction-toMSOP-8-EP (Note 6) Ambient DFN3030E-8 (Note 6)
Unit V A A A A
NEW PRODUCT
m
4
C/W
3. Pulse-testing techniques maintain junction temperature close to ambient temperature; thermal effects must be taken into account separately. 4. The discharge function is active when the device is disabled (when enable is de-asserted or during power-up power-down when VIN < V UVLO). The discharge function offers a resistive discharge path for the external storage capacitor for limited time. 5. Test condition for SO-8: Device mounted on FR-4 substrate PCB with minimum recommended pad layout. 6. Test condition for MSOP-8-EP and DFN3030E-8: Device mounted on 2" x 2" FR-4 substrate PCB, 2oz copper, with minimum recommended pad on top layer and thermal vias to bottom layer ground plane.
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
4 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics
VEN VEN TD(OFF) TF
90% 10% 90% 10%
50%
50%
50%
50%
TR TD(ON) VOUT
TR TD(ON) VOUT
10% 90%
TD(OFF) TF
90% 10%
NEW PRODUCT
Figure 1. Voltage Waveforms: AP2182A (left), AP2192A (right)
Figure 2. Response Time to Short Circuit Waveform
All Enable Plots are for AP2182A Active Low Turn-On Delay and Rise Time
EN 5V/div EN 5V/div CL=1F Iin 500mA/div Iin 500mA/div TA=25C RL=5
Turn-Off Delay and Fall Time
Vout 2V/div
CL=1F TA=25C RL=5 Vout 2V/div
500us/div
500us/div
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
5 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued)
Turn-On Delay and Rise Time
EN 5V/div EN 5V/div CL=100F TA=25C Iin 500mA/div Iin 500mA/div RL=5
Turn-Off Delay and Fall Time
NEW PRODUCT
Vout 2V/div
Vout 2V/div CL=100F TA=25C RL=5
500us/div Short Circuit Current, Device Enabled Into Short
EN 5V/div EN 5V/div
500us/div Inrush Current with Different Load Capacitance
CL=100F
CL=220F
CL=470F
Iout 500mA/div
VIN=5V TA=25C CL=1F
Iin 500mA/div
VIN=5V TA=25C RL=3
500us/div 1 Load Connected to Enabled Device
VIN=5V TA=25C CL=1F FLG 2V/div FLG 2V/div
500us/div 0.6 Load Connected to Enabled Device
VIN=5V TA=25C CL=1F
Iout 1A/div
Iout 1A/div
2ms/div
2ms/div
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
6 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued)
Short Circuit with Blanking Time and Recovery
FLG 5V/div TA=25C Iout 500mA/div FLG 5V/div CL=1F RL=3
Power On
Vout 5V/div
VIN=5V TA=25C CL=1F Vin 5V/div Vout 5V/div
NEW PRODUCT
Iout 1A/div
20ms/div Power Off
FLG 5V/div TA=25C CL=1F RL=3 FLG 5V/div
1ms/div Device Enabled
Iout 500mA/div
Iout 500mA/div
Vin 5V/div Vout 5V/div
EN 5V/div Vout 5V/div TA=25C CL=1F RL=3
10ms/div Device Disabled
FLG 5V/div
1ms/div UVLO Increasing
Iout 500mA/div
TA=25C CL=1F RL=3
Vin 2V/div
Vout 5V/div EN 5V/div Vout 5V/div Iout 1A/div TA=25C CL=1F RL=3
1ms/div
1ms/div
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
7 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued)
UVLO Decreasing
TA=25C Vin 2V/div CL=1F RL=3 Vin 2V/div
UVLO Increasing (No Load)
NEW PRODUCT
Vout 5V/div Vout 5V/div Iout 1A/div TA=25C CL=1F RL=0
10ms/div
1ms/div Channel 1 Enabled and Shorted with Channel 2 Enabled
VIN=5V TA=25C TA=25C Vout1 5V/div CL=1F CL=1F RL=0
UVLO Decreasing (No Load)
Vin 2V/div
FLG1 5V/div
Vout2 5V/div Vout 5V/div FLG2 5V/div
20ms/div Channel 2 Enabled and Shorted with Channel 1 Enabled
5ms/div Channels 1 and 2 Enabled and Shorted
Vout1 5V/div
FLG1 5V/div
VIN=5V TA=25C CL=1F
Vout2 5V/div FLG2 5V/div
5ms/div
5ms/div
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
8 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued)
NEW PRODUCT
CL=100uF RL=5 TA=25C
CL=100uF RL=5 TA=25C
CL=1uF RL=5 TA=25C
CL=1uF RL=5 TA=25C
Vin=5.0V Vin=5.5V Vin=5.5V
Vin=5.0V
Vin=2.7V
Vin=2.7V
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
9 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued)
Vin=3.3V Vin=3.3V
NEW PRODUCT
Vin=5V Vin=5V
CL=1uF
UVLO Rising
UVLO Falling VIN=5V VOUT=4V CL=1uF
VIN=5V TA=25C CL=1uF
TA=25C CL=1uF
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
10 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Application Note
Power Supply Considerations
A 0.1F to 1F X7R or X5R ceramic bypass capacitor between IN and GND, close to the device, is recommended. Placing a high-value electrolytic capacitor on the input and output pin(s) is recommended when the output load is heavy. This precaution reduces power-supply transients that may cause ringing on the input. Additionally, bypassing the output with a 1F ceramic capacitor improves the immunity of the device to shortcircuit transients.
Over-current and Short Circuit Protection
NEW PRODUCT
An internal sensing FET is employed to check for over-current conditions. Unlike current-sense resistors, sense FETs do not increase the series resistance of the current path. When an overcurrent condition is detected, the device maintains a constant output current and reduces the output voltage accordingly. Complete shutdown occurs only if the fault stays long enough to activate thermal limiting. Three possible overload conditions can occur. In the first condition, the output has been shorted to GND before the device is enabled or before VIN has been applied. The AP2182A/AP2192A senses the short circuit and immediately clamps output current to a certain safe level namely ILIMIT. In the second condition, an output short or an overload occurs while the device is enabled. At the instance the overload occurs, higher inrush current may flow for a very short period of time before the current limit function can react. The input capacitor(s) rapidly discharge through the device, activating current limit circuitry. Protection is achieved by momentarily opening the P-MOS high-side power switch and then gradually turning it on. After the current limit function has tripped (reached the over-current trip threshold), the device switches into current limiting mode and the current is clamped at ILIMIT. The threshold for activating current limiting is 2A typical per channel. In the third condition, the load has been gradually increased beyond the recommended operating current. The current is permitted to rise until the current-limit threshold (ITRIG) is reached or until the thermal limit of the device is exceeded. The AP2182A/AP2192A is capable of delivering current up to the current-limit threshold without damaging the device. Once the threshold has been reached, the device switches into its current limiting mode and is set at ILIMIT.
FLG Response
When an over-current or over-temperature shutdown condition is encountered, the FLG open-drain output goes active low after a nominal 7-ms deglitch timeout. The FLG output remains low until both over-current and overtemperature conditions are removed. Connecting a heavy capacitive load to the output of the device can cause a momentary over-current condition, which does not trigger the FLG due to the 7-ms deglitch timeout. The AP2182A/AP2192A is designed to eliminate false over-current reporting without the need of external components to remove unwanted pulses.
Power Dissipation and Junction Temperature
The low on-resistance of the internal MOSFET allows the small surface-mount packages to pass large current. Using the maximum operating ambient temperature (TA) and RDS(ON), the power dissipation can be calculated by: PD = RDS(ON)x I2 Finally, calculate the junction temperature: TJ = PD x RJA + TA Where: TA= Ambient temperature C RJA = Thermal resistance PD = Total power dissipation
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
11 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Application Note (Continued)
Thermal Protection
Thermal protection prevents the IC from damage when heavy-overload or short-circuit faults are present for extended periods of time. The AP2182A/AP2192A implements a thermal sensing to monitor the operating junction temperature of the power distribution switch. Once the die temperature rises to approximately 140C due to excessive power dissipation in an over-current or short-circuit condition the internal thermal sense circuitry turns the power switch off, thus preventing the power switch from damage. Hysteresis is built into the thermal sense circuit allowing the device to cool down approximately 25C before the switch turns back on. The switch continues to cycle in this manner until the load fault or input power is removed. The FLG open-drain output is asserted when an over-temperature shutdown or over-current occurs with 7-ms deglitch.
NEW PRODUCT
Under-voltage Lockout (UVLO)
Under-voltage lockout function (UVLO) keeps the internal power switch from being turned on until the power supply has reached at least 2V, even if the switch is enabled. Whenever the input voltage falls below approximately 2V, the power switch is quickly turned off. This facilitates the design of hot-insertion systems where it is not possible to turn off the power switch before input power is removed.
Discharge Function
The discharge function of the device is active when enable is disabled or de-asserted. The discharge function with the N-MOS power switch implementation is activated and offers a resistive discharge path for the external storage capacitor. This is designed for discharging any residue of the output voltage when either no external output resistance or load resistance is present at the output.
Host/Self-Powered HUBs
Hosts and self-powered hubs (SPH) have a local power supply that powers the embedded functions and the downstream ports. This power supply must provide from 5.25V to 4.75V to the board side of the downstream connection under both full-load and no-load conditions. Hosts and SPHs are required to have current-limit protection and must report over-current conditions to the USB controller. Typical SPHs are desktop PCs, monitors, printers, and stand-alone hubs.
Generic Hot-Plug Applications
In many applications it may be necessary to remove modules or pc boards while the main unit is still operating. These are considered hot-plug applications. Such implementations require the control of current surges seen by the main power supply and the card being inserted. The most effective way to control these surges is to limit and slowly ramp the current and voltage being applied to the card, similar to the way in which a power supply normally turns on. Due to the controlled rise times and fall times of the AP2182A/AP2192A, these devices can be used to provide a softer start-up to devices being hot-plugged into a powered system. The UVLO feature of the AP2182A/AP2192A also ensures that the switch is off after the card has been removed, and that the switch is off during the next insertion. By placing the AP2182A/AP2192A between the VCC input and the rest of the circuitry, the input power reaches these devices first after insertion. The typical rise time of the switch is approximately 1ms, providing a slow voltage ramp at the output of the device. This implementation controls system surge current and provides a hotplugging mechanism for any device.
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
12 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Ordering Information
AP 21 X 2 A XX G - X
Enable 8 : Active Low 9 : Active High Channel 2 : 2 Channel Package S : SO-8 MP : MSOP-8-EP FGE : DFN3030E-8 Green G : Green Packing 7/13 : Tape & Reel
NEW PRODUCT
Device AP21X2ASG-13 AP21X2AMPG-13 AP21X2AFGEG-7
Notes:
Package Code S MP FGE
Packaging (Note 7) SO-8 MSOP-8-EP DFN3030E-8
7"/13" Tape and Reel Quantity Part Number Suffix 2500/Tape & Reel -13 2500/Tape & Reel -13 3000/Tape & Reel -7
7. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
Marking Information
(1) SO-8
( Top view ) 8 Logo Part Number 8 : Active Low 9 : Active High 7 6 5 2 : 2 Channel YY : Year : 08, 09,10~ WW : Week : 01~52; 52 represents 52 and 53 week X : Internal Code G : Green 4
AP21X X A
YY WW X X
1
(2) MSOP-8-EP
2
3
( Top view ) 8 Logo Part Number 8 : Active Low 9 : Active High 1 7 6 5 A~Z : Green MSOP-8-EP Y : Year : 0~9 W : Week : a~z : 1~26 week; A~Z : 27~52 week; Z represents 52 and 53 week 2 : 2 Channel
YWXE
AP21X X A
2 3 4
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
13 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Marking Information (Continued)
(3) DFN3030E-8
( Top View ) XX YW X
NEW PRODUCT
XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Green
Package DFN3030E-8 DFN3030E-8 Identification Code AE AF
Part Number AP2182AFGEG-7 AP2192AFGEG-7
Package Outline Dimensions (All Dimensions in mm)
(1) Package type: SO-8
3.85/3.95
5.90/6.10
0.10/0.20
0.254 0.62/0.82
Gauge Plane Seating Plane
Detail "A"
7~9 1.30/1.50 1.75max. 0.15/0.25
0.35max. 45
7~9
Detail "A"
0/8
1.27typ 4.85/4.95
0.3/0.5
8x-0.60 5.4 6x-1.27 8x-1.55
Land Pattern Recommendation (Unit: mm)
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
14 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Package Outline Dimensions (Continued)
(2) Package type: MSOP-8-EP
8x-0.45 2.9/3.1 4.7/5.1 4.4 6x-0.65 8x-1.4 1
EXPOSED PAD (BOTTOM)
NEW PRODUCT
1 0.75/0.95 1.10Max. 0.15Typ. 0.65Bsc. 0.22/0.38
Land Pattern Recommendation (Unit:mm) "A"
1
EXPOSED PAD (BOTTOM) 0.05/0.15 0.4/0.8 0.95Ref. DETAIL "A"
0.25 Gauge plane
0 / 8
0.05 2.9/3.1
1.65/1.95
(3) Package type: DFN3030E-8
TOP MARK
1.35/1.65
0.10 C 8X0.08 C 0.57/0.63 0/0.05 0.25 A
0.15Typ.
Seating Plane
Side View
C
2X-
2.95/3.05
B
A
(Pin #1 ID)
2.95/3.05
1.40/1.60
R0 .20
2.15/2.35
2X-
0.25 B 0.30/0.60 8X0.65Typ. 0.20/0.30 8X0.10 CAB
Bottom View
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
15 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Taping Orientation (Note 8)
For DFN3030E-8
NEW PRODUCT
Notes:
8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
16 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.
NEW PRODUCT
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
17 of 17 www.diodes.com
October 2010
(c) Diodes Incorporated

▲Up To Search▲

Price & Availability of AP2192A

	To Download AP2192A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .